Fill-Up Tool

• Fill-up is accomplished by pumping through the top drive. Hoses or conventional accessories are NOT required.
• Fill-up can be accomplished while casing is run. No shutdown is required.
• Circulation is accomplished by slacking down to place the FC-1 seal inside the casing.
• Circulation can be achieved while washing down without accessory rig-up.
• The Mud Saver Valve eliminates spilling of costly drilling fluids after fill or circulation.
• Rig time is saved by performing both fill-up and circulation without rigging up accessories.
• Safety is improved as rig hands are not near pressure lines or valves while filling or circulating.
• Operation does not require axial movement to actuate the Mud Saver valve.
  

• 4-1/2” to 26” fill-up and circulating capablitites, any weights and thread.
• Top drive or hook rigs can be accommodated.

• The FC-1 Tool can be used on rigs NOT equipped with at top drive drilling system through the use of an "Adapter Assembly.”

• 4-1/2” to 13-5/8” casing fill-up and circulating capabilities with the additional benefit of connecting the casing directly to the top drive to rotate and reciprocate the casing string.

• For top drive rigs that can not use the kelly hose when running casing. Allows 2” mud supply hose to be conected to the FC-1 tool for casing fill-up and circulating. Also maybe used on Flow-back jobs, where flowing back through the top drive cause a restriction.

• 4-1/2” to 26” casing fill-up and circulating capabilities, with the added benefit of being able to apply the weight of the top drive / hook directly to the casing string. This aids in pushing the casing past obstructions and / or dog legs.

• 4-1/2” to 26” casing reverse flow capabilities, can transfer fluid for the casing annulus back to the mud pits as the casing is lowered into the hole. For tie-backs in cased hole applications.

• 4-1/2” to 26” casing reverse flow capabilities and circulating conditions for well control problems on liners, and full strings with sensitive pressure gradients.

• Unique pressure bypass mandrel eliminates the possibility of pulling the seal under pressure, increases Mud Saver Valve life and circulation rates.

• 7” to 20” fill-up and circulating during casing operations and converts to cementing operations.

• 4-1/2” to 26” casing pressure test on tie-backs, economical on batch jobs with multiple casing sizes and multiple wells.

Stab-in Cementing Pack Off Tool

• 9-5/8” to 26” casing fill-up and circulating on casing running operations for Tag-in jobs and then may be used to pressurize the casing annulus for setting external casing packer.